CRGO

Send Inquiry

Product Code : 04

Product Description

CRGO

Scope of Application

Oriented electrical steel is generally classified as conventional oriented electrical steel and high permeability oriented electrical steel. It is widely used in transformers, large-scale generators and other equipment cores. Compared with general oriented electrical steel, high permeability oriented electrical steel has a higher permeability, a lower hysteresis loss, a lower hysteresis expansion and a lower sensitivity of assembly stress.

Size

Coil	Thickness	0.23mm,0.27mm,0.30mm
	Available width	8500 ~ 1000mm
	ID	510 mm
	Single weight	2 ~ 4 ton

Surface Insulation

Unless otherwise specified, HIB and conventional GO are supplied with inorganic coating T2

Other Strip

( sheet ) with smooth surface, without defects such as rust, mill marks, hole, bubble, stratification, roller printing, and so on;
the burr height is not more than 0.02mm;
flatness of the strip ( sheet ) not more than 1%, camber is not more than 1.0mm per two meters.

Width mm	Thickness mm	Thickness Tolerance mm	Transverse Thickness Tolerance	Width Tolerance mm
> 850	0.23	±0.02	≤0.015	+0 ~ +1.5
	0.27	±0.03
	0.30