| Home | » Products | » Hot Rolled Sheet | » CRNGO Steel Strip |
CRNGO Steel Strip
Product Code : 07
Product Description
CRNGO Steel Strip
We are associated with the most trusted vendors of the industry to acquire raw materials for our steel products. Our CRNGO Steel Strip is widely used in transformers, large-scale generators, and other equipments. These strips are perfectly developed by using modern techniques. We offer our CRNGO Steel Strip in different dimensions according to the requirements of the client. These strips are highly durable and easy to install. Our steel strips are offered at reasonable rates to our customers.
Features:
- High permeability
- Lower hysteresis loss
- Impeccable finishing
Conventional Non-oriented Electrical Steel
Scope of Application:
The non-oriented electrical steel (full process) is class high grade non-oriented electrical steel and mid-low grade non-oriented electrical steel. High-grade non-oriented electrical steel is widely used in rotating motor, small transformers and other electromechanical equipment cores. The mid-low grade non-oriented electrical steel is widely used in low-cost production of household appliances and other equipments, especially applicable to production of continuous punching machines.
Size
| Coil | Thickness | High Grade | 35WW230～35WW440 | 0.35mm | |
|
| 50WW250～50WW470 | 0.50mm | |||
|
| Mid-low Grade | 50WW600～50WW1300 | 0.50mm | ||
| Width | Standard Width | High Grade | 35WW230～35WW440 | 1000mm | |
|
| 50WW250～50WW470 |
| |||
|
| Mid-low Grade | 50WW600～50WW1300 | 1000mm、1100mm、1150mm、1200mm | ||
|
| Available Width | High Grade | 900mm ～ 1050mm | ||
|
| Mid-low Grade | 900mm ～ 1250mm | |||
| Coil ID |
| 510mm | |||
|
| High Grade | 2 ～ 5 ton | |||
|
| Mid-low Grade | 2 ～ 8 ton | |||
Surface Insulation
Non-oriented electrical steel (whole process) has semi-organic insulation coating T4 (Other coatings can be used as per users’ requirements).
Size & Tolerance
| Width mm | Thickness mm | Thickness tolerance mm | Horizontal Thickness difference mm | Width tolerance mm | Camber mm |
| >1000 | 0.35 | ±0.03 | ≤0.03 | +1.5 | ≤1.0 |
| 0.50 | ±0.03 | ≤0.04 | 0 |
X
